Detail 01
Hi-hat clutch
The part that grips the top hat on the pull rod. It sets how tightly the two cymbals meet and how the hat sounds half open.
Product detailSKU #1273887992948
GibraltarPro Clutch for Hi-Hat Stand
1/8
Independent shopping perspective
The Korena take
Replacement hi-hat clutch. For drummers whose stock clutch slips, rattles, or has lost a felt, and for closed-hat setups on a second stand.
Strong match
Who this is for
- Replacing a clutch that slips down mid-song
- Setting a fixed closed hi-hat on a spare stand
- Keeping a backup clutch in the hardware case
Consider the trade-offs
When to look elsewhere
- Drummers wanting a drop clutch for double bass work
- Anyone needing the hi-hat stand itself
- Players whose slipping is from a worn stand pull rod
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Threaded lock
Locks the clutch at a set height on the rod so the top hat does not creep down as you play.
Detail 03
Felt placement
Felts above and below the top cymbal control how freely it moves, which changes chick tightness and sloshiness.
Detail 04
Gibraltar hardware
Cut to standard hi-hat pull rod threading, so it fits most common hi-hat stands, not only Gibraltar.
Final check
Know before you order
- 01Check your pull rod thread, hi-hat rods are mostly standard but not universally
- 02Not a drop clutch, it will not release the hats with a pedal
- 03Confirm felts are included before assuming, keep your old ones as spares
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit my hi-hat stand?
It uses standard hi-hat pull rod threading, which covers most stands from the major hardware brands. Check your rod thread if you have an unusual or vintage stand.
02Is this a drop clutch?
No. It is a standard clutch that holds the top hat at a fixed height. A drop clutch is a different part that releases the hats for hands-free closed playing.
03My hats keep sliding down. Will this fix it?
If the clutch itself is worn or the threads are stripped, yes. If the pull rod or the stand's locking mechanism is the problem, a new clutch will not help.
04Can I use this to lock a closed hi-hat on a cymbal stand?
Yes, that is a common use. It clamps the cymbals together on a rod so you get a fixed closed hat sound on a second stand.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51273887992948
Worth comparing
1 of 12
